Your Solution based only on your selections, would require you to install
On the flow out as close to the boiler, you should install a On the return to the boiler you should install a On the return to the chiller you should install a CleanVent Air (Microbubble) Separator - - 1Pass Air, Dirt & Microbubble Separator - -
This will remove the dirt and magnetite circulating in the system. Removing 100% of circulating magnetite and other metal particles and dirt particles down to 2-3 micron and less, protecting the boiler and other system components from the harmful and clogging effects of both circulating dirt and magnetite this can be easily demounted for heavy dirt and particle removal and should be installed before any equipment that needs protecting such as pumps.
The 1PASS has a removable top to clean the internal filter when the building is serviced.
To remove Air (Microbubbles). To de-aerate the system of air (microbubbles) and other dissolved gases, protecting the boiler and pipework from the harmful and corrosive effects of air and other gases. This should be installed preferably at the highest temperature, before any equipment that needs protecting e.g. Pumps Etc.
This will remove the dirt and magnetite circulating in the system. Removing 100% of circulating magnetite and other metal particles and dirt particles down to 2-3 micron and less, protecting the boiler and other system components from the harmful and clogging effects of both circulating dirt and magnetite this can be easily demounted for heavy dirt and particle removal and should be installed before any equipment that needs protecting such as pumps.
The 1PASS has a removable top to clean the internal filter when the building is serviced.
The estimated pressure drop will be kPa.
On the flow out as close to the boiler, you should install a On the return to the boiler you should install a On the return to the chiller you should install a CleanVent Air (Microbubble) Separator - - 1Pass Air, Dirt & Microbubble Separator - -
This will remove the dirt and magnetite circulating in the system. Removing 100% of circulating magnetite and other metal particles and dirt particles down to 2-3 micron and less, protecting the boiler and other system components from the harmful and clogging effects of both circulating dirt and magnetite this can be easily demounted for heavy dirt and particle removal and should be installed before any equipment that needs protecting such as pumps.
The 1PASS has a removable top to clean the internal filter when the building is serviced.
To remove Air (Microbubbles). To de-aerate the system of air (microbubbles) and other dissolved gases, protecting the boiler and pipework from the harmful and corrosive effects of air and other gases. This should be installed preferably at the highest temperature, before any equipment that needs protecting e.g. Pumps Etc.
This will remove the dirt and magnetite circulating in the system. Removing 100% of circulating magnetite and other metal particles and dirt particles down to 2-3 micron and less, protecting the boiler and other system components from the harmful and clogging effects of both circulating dirt and magnetite this can be easily demounted for heavy dirt and particle removal and should be installed before any equipment that needs protecting such as pumps.
The 1PASS has a removable top to clean the internal filter when the building is serviced.
The estimated pressure drop will be kPa.
Easy Treat
Fabricated Products recommends you install our EasyTreat Chemical Dosing Pot in your system. The EasyTreat chemical dosing pot is an innovative water treatment solution for Heating & Cooling water systems that provides the results of high-performance liquid treatment programs, yet is easier to use and is more environmentally responsible. Your system size requires you install an Easy Treat
Your requirements are outside our standard product range, please call us on 01709 720 842 for support.