CLEANVENT
Air & Dirt Separators
Modern boilers have very low water content, making them vulnerable to accumulated deposits (dirt) causing boiler failure. The main reason for appliance breakdown is this dirty water.
System cleansing and water treatment is now vital and necessary to the welfare and prolonged existence of the boiler/chiller plant.
The Cleanvent combines the removal of air and dirt through a single unit. Installed at the hottest point in the system, the Cleanvent will eliminate microbubbles from heating and chilled water systems. It is also used to remove dirt particles from heating and chilled water systems. Installed it will eliminate all dirt particles down to 5 microns.
THE FOLLOWING TABLE HIGHLIGHTS EACH MODEL AND ITS CAPABILITIES.
Further information on each can be found by clicking the data sheet column.
| Model | Air | Dirt | Demountable | Data Sheet |
|---|---|---|---|---|
| CVA | DOWNLOAD | |||
| CVD | DOWNLOAD | |||
| CVD-R | DOWNLOAD | |||
| CVAD | DOWNLOAD | |||
| CVAD-R | DOWNLOAD | |||
| SCVA * | DOWNLOAD | |||
| SCVD * | DOWNLOAD | |||
| SCVAD * | DOWNLOAD |
* BSP screwed version for smaller pipes
How does the CleanVent work?

FAQS
A dedicated air separator primarily removes air and microbubbles, whereas a combined air and dirt separator performs both functions within one unit. CleanVent is designed to remove microbubbles as well as dirt particles from heating and chilled water systems.
For effective microbubble removal, the CleanVent should be positioned at the hottest point within the system. The exact installation position can vary depending on the system design and whether air removal, dirt separation or both are required.
