CHEMICAL DOSING POTS
Our Chemical Dosing Pots are supplied complete with all valves
Dosing pots are required in order to feed liquid chemicals such as corrosion inhibitors into closed systems.
The chemical dosing pots consist of a stainless steel vessel with inlet (return) and outlet (flow) valves, a drain valve and a filling valve. A steel tundish, air release valve, wall mounting brackets and a non-return valve.
Closed re-circulating water systems (chilled or hot water) can be simply dosed on a regular / manual basis by use of these dosing pots. Fitted across flow and return lines, they provide a means to annex a portion of the system water which can be drained away and replaced with the chemical to be dosed. When re-connected to the system, the chemical is flushed through.
The dosing pots are fitted with large 1" valves, which ensure quick and easy action of the pot even in low flow/pressure conditions. An air vent valve enables the pot to be purged during filling thus eliminating undesirable air ingress to the system. A NRV check valve is fitted into the fill line below the tundish.
- Stainless steel shell & tundish
- Welded to BS EN 287
All chemical dosing pots that are designed to PD 5500:2009 category 3 (CE marked) have maximum working pressures as across.
Chemical Dosing pots that are not designed to this specification have a maximum working pressure of 14 bar throughout the range (3.5 litre to 25 litre).
|Working Pressure||Flow Rate|
|14 bar||3.5 litres to 6 litres inclusive.|
|10 bar||10 litres to 20 litres inclusive.|
|8 bar||25 litres +|